Home page

Product Series

Foshan, Guangdong, China

Non oriented silicon steel coil containing 1.0 to 4.5% of silicon and less than 0.08% of carbon is called silicon steel.50W800 non oriented silicon steel coil has the characteristics of high magnetic permeability, low coercive force, and large resistivity.It is mainly used in motors, transformers, electrical appliances, and electrical instruments. So it is also called Electrical steel.

Get ln Touch

Low Core Loss 50W350 Non-Oriented Silicon Steel Coil

Non oriented silicon steel coil containing 1.0 to 4.5% of silicon and less than 0.08% of carbon is called silicon steel.50W350 non oriented silicon steel coil has the characteristics of high magnetic permeability, low coercive force, and large resistivity.It is mainly used in motors, transformers, electrical appliances, and electrical instruments. So it is also called Electrical steel.

Get ln Touch

50W1300 Non-Oriented Silicon Steel Coil

Non oriented silicon steel coil containing 1.0 to 4.5% of silicon and less than 0.08% of carbon is called silicon steel.50W1300 non oriented silicon steel coil has the characteristics of high magnetic permeability, low coercive force, and large resistivity.It is mainly used in motors, transformers, electrical appliances, and electrical instruments. So it is also called Electrical steel.

Get ln Touch

Custom Motor Cores for Reliable Water Pumps

Manufacturer of high-reliability stator and rotor cores for submersible and centrifugal water pumps. Our custom solutions feature C5-grade anti-corrosion coating for ultimate durability in IP68 environments. ISO 9001 certified.

Get ln Touch

SK85(SK5) high carbon steel coil / strip

SK85 (SK5) steel is Japanese high-grade carbon tool steel, cold work die steel, high carbon steel with a mass fraction of carbon above 0.80%. SK85 (SK5) steel hardness after quenching is 50~60HRC. It has high hardness, excellent wear resistance, and easy spheroidization.

Get ln Touch

C75S 1074 steel coil

C75S steel is a high-carbon spring steel known for its good elasticity and tensile strength. The “S” in its designation indicates it is of a special quality, often with stricter controls on impurities like sulfur and phosphorus. The key C75S properties of high hardness and flexibility are developed through quenching and tempering.

Get ln Touch

SK95(SK4) T10 high carbon steel coil

SK95(SK4) steel is the most common carbon tool steel with moderate toughness and low production cost. After heat treatment, SK95(SK4) steel hardness can reach 58-60HRC. However, this steel has low hardenability and poor heat resistance (250°C). It is not easy to overheat while still maintaining a fine grain.

Get ln Touch

1566 65Mn spring steel coil

65Mn steel is a spring steel used for various flat and round springs, cushion springs, spring springs, etc. in small sizes.Manganese in 65Mn improves hardenability, φ12mm steel can be hardened in oil, the surface decarburization tendency is smaller than silicon steel, and the comprehensive mechanical properties after heat treatment are better than carbon steel, but it has overheating sensitivity and temper brittleness.

Get ln Touch

Zero Spangle Galvanized Steel Coil and Sheet

Zero Spangle Galvanized Steel Coil refers to a specific type of surface finish on hot-dip galvanized steel. It is characterized by a uniform, smooth, and silver-gray surface with no visible zinc crystals, or “spangles.” This finish is achieved through a controlled manufacturing process involving specific zinc bath chemistry and rapid cooling after the coating is applied.

Get ln Touch

DC03 low-carbon steel coil

DC03 steel is a low-carbon cold-rolled steel in European standard, as deep drawing quality steel, offering significantly better ductility and formability than DC01, which allows it to handle moderately difficult drawing processes.

Get ln Touch

SPCC low-carbon steel coil

SPCC steel is the designation for a commercial quality, cold-rolled carbon steel under the Japanese Industrial Standard (JIS) G3141. It is the most general-purpose grade within its series, primarily valued for its excellent surface finish and suitability for basic forming operations.

Get ln Touch

201 Stainless Steel

201 Stainless Steel – a cost‑effective austenitic grade offering good formability, weldability, and moderate corrosion resistance. Ideal for indoor applications such as decorative trim, kitchenware, and light-duty piping, it provides a practical, economical solution for non‑critical environments where high‑grade stainless is not required.

Get ln Touch

< 1 2 3 4 >

Can't find the product you need?

Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry

GET IN TOUCH

Product Category

→ Silicon Steel

→ Medium-High Carbon Steel

→ Cold Rolled Steel

→ Galvanized Steel

→ Stainless Steel

E-mail: contact@weizhanmetal.com
WhatsApp: +86-13822142629

Tel: +86-13822142629

Landline: +86-757-2239 8011

Fax: +86-757-2239 8056

P.C.: 528311

ADD: No. 1 Weiye Road, Beijiao Town, Shunde District, Foshan, Guangdong China 528311.

WeChat

【 Business license】

Inquiry

Inquiry：→

Whatsapp

Whatsapp：+86 13822142629

Email

Email：contact@weizhanmetal.com

Tel

Tel：+86-13822142629