Home page

Product Series

Foshan, Guangdong, China

Al-Si Coated Steel – a hot-dip aluminum-silicon coated steel offering excellent high-temperature oxidation resistance, thermal reflectivity, and corrosion protection. The Al-Si alloy layer forms a dense oxide film that withstands heat up to approximately 800°C, while the steel substrate provides strength and formability.

Get ln Touch

316 Stainless steel series

316 Stainless Steel – a molybdenum-alloyed austenitic grade offering superior resistance to pitting, crevice corrosion, and chlorides. Ideal for marine, chemical, pharmaceutical, and coastal environments, it delivers high strength, excellent formability, and long‑term reliability with minimal upkeep.

Get ln Touch

DC06 low-carbon steel coil

DC06 steel is a low-carbon cold-rolled steel in European standard. As the highest-performance grade,it represents the pinnacle of formability in cold-rolled sheets. It is reserved for the most demanding components that require extreme ductility, uniformity, and stability.

Get ln Touch

Low Core Loss 35W440 Non-Oriented Silicon Steel Coil

Non oriented silicon steel coil containing 1.0 to 4.5% of silicon and less than 0.08% of carbon is called silicon steel.35W440 non oriented silicon steel coil has the characteristics of high magnetic permeability, low coercive force, and large resistivity.It is mainly used in motors, transformers, electrical appliances, and electrical instruments. So it is also called Electrical steel.

Get ln Touch

Industrial & Custom Transformer Cores

Transformer cores are a key component in electrical transformers, facilitating efficient energy conversion. Manufactured from high-grade Grain-Oriented (GO) and Non-Grain-Oriented (NGO) Silicon Steel and Electrical Steel, our product range includes EI, Toroidal, C-cores, and other shapes based on customer specifications.

Get ln Touch

S60C 1059 medium-to-high carbon steel coil

S60C steel is a medium-to-high carbon grade. It is chosen for applications that need greater strength and wear resistance than S50C. Heat treatment is required to achieve the key S60C properties, such as very high hardness. However, this also makes the it more difficult to machine and weld.

Get ln Touch

410 Stainless steel series

The 400 series stainless steel is an alloy of iron, carbon, and chromium. Because it does not contain nickel, it is a nickel saving stainless steel, also known as stainless iron.

Get ln Touch

S50C 1050 medium carbon steel coil

S50C steel is a medium carbon steel offering higher strength and wear resistance than S45C. Through heat treatment, it can achieve a hard, wear-resistant surface, making it excellent for more applications. The primary trade-offs for this performance are reduced toughness and more difficult machining and welding. As its hardenability is limited, it is best applied to components of small to medium size.

Get ln Touch

DX51D+Z40/80/100/120/180/275 Galvanized Steel Strip and Sheet

X51D+Z galvanized steel is one of the most widely specified grades for hot-dip galvanized steel. DX51D signifies a steel grade for cold forming, specifically defined as “Bending and Profiling Quality.” Its primary characteristic is not high strength, but rather excellent ductility and formability, which are achieved through controlled chemical composition and processing.

Get ln Touch

75Cr1 steel coil

75Cr1 steel is a high-carbon alloy steel known for its high hardness and excellent wear resistance after heat treatment.The addition of chromium facilitates the heat treatment process and allows higher hardness to be achieved than the standard C75 Carbon Steel. The key 75Cr1 properties of a sharp, durable edge and good toughness are developed through a careful quenching and tempering process.

Get ln Touch

SKS51 Alloy tool steel coil

SKS51 steel is a common alloy tool steel, valued for its good combination of toughness and wear resistance. Its key SKS51 properties are developed through heat treatment, which imparts high hardness suitable for cutting and forming tools. The addition of nickel and chromium makes this SKS51 material tougher than standard carbon steels.

Get ln Touch

SPCE low-carbon steel coil

SPCE is the designation for a deep drawing quality, cold-rolled carbon steel under the Japanese Industrial Standard. It represents the highest level of formability among the three common grades (SPCC, SPCD, SPCE).

Get ln Touch

< 1 2 3 4 >

Can't find the product you need?

Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry

GET IN TOUCH

Product Category

→ Silicon Steel

→ Medium-High Carbon Steel

→ Cold Rolled Steel

→ Galvanized Steel

→ Stainless Steel

E-mail: contact@weizhanmetal.com
WhatsApp: +86-13822142629

Tel: +86-13822142629

Landline: +86-757-2239 8011

Fax: +86-757-2239 8056

P.C.: 528311

ADD: No. 1 Weiye Road, Beijiao Town, Shunde District, Foshan, Guangdong China 528311.

WeChat

【 Business license】

Inquiry

Inquiry：→

Whatsapp

Whatsapp：+86 13822142629

Email

Email：contact@weizhanmetal.com

Tel

Tel：+86-13822142629